控制仪表

型号/品名:KH02C

PRODUCT INTRODUCTION※特点:采用高速的24位 $Sigma -Delta$ A/D转换器,信号高速采样、高分辨率、精心设计动态滤波程序,数据高速稳定可靠。支持重量标定、滤波强度设置、地址修改、通讯稳定不中断不掉数据,抗电磁干扰能力强,适用工业现场的应用。通讯接口可选择:RS485接口或RS232接口。MODBUS-RTU通讯方式。宽电压工作范围:DC9~28V。通讯地址支持拨码开关设置或上位机设置。通讯波特率支持拨码开关设置或上位机设置,波特率设置范2400~115200。支持

产品尺寸图

PRODUCT INTRODUCTION
※特点:
采用高速的24位 $Sigma -Delta$ A/D转换器,信号高速采样、高分辨率、精心设计动态滤波程序,数据高速稳定可靠。
支持重量标定、滤波强度设置、地址修改、通讯稳定不中断不掉数据,抗电磁干扰能力强,适用工业现场的应用。
通讯接口可选择:RS485接口或RS232接口。
MODBUS-RTU通讯方式。
宽电压工作范围:DC9~28V。
通讯地址支持拨码开关设置或上位机设置。
通讯波特率支持拨码开关设置或上位机设置,波特率设置范2400~115200。
支持上位机通讯初始化。
通讯支持广播指令。
※FEATURES:
Adopts a high-speed 24-bit $Sigma -Delta$ A/D converter, enabling high-speed signal sampling and high resolution; a well-designed dynamic filtering program ensures high-speed, stable and reliable data.
Supports weight calibration, filtering intensity setting, and address modification; features stable communication without interruption or data loss, along with strong anti-electromagnetic interference capability, making it suitable for industrial on-site applications.
Selectable communication interfaces: RS485 interface or RS232 interface.
MODBUS-RTU communication protocol.
Wide voltage operating range: DC 9~28V.
Communication address can be set via DIP switch or upper computer.
Communication baud rate can be set via DIP switch or upper computer, with a setting range of 2400~115200 bps.
Supports communication initialization via upper computer.
Communication supports broadcast commands.

产品技术特性表

技术参数 Technical parameter
AD 内码分辨率AD internal code resolution 54万(对应灵敏度:2.0mV/V,灵敏度越大内码也越大)540,000 (Corresponding to Sensitivity: 2.0 mV/V. Note:Higher sensitivity results in a larger internal code.) 非线性Non-linearity 优于0.01%FSBetter than 0.01% F.S.
清零范围Zero clearing range 负载阻抗小于500ΩLoad Impedance < 500Ω 传感器激励电压Sensor Excitation Voltage 直流5VDC,可驱动1~4只传感器(输出电阻≥350)DC 5V, capable of driving 1 to 4 sensors (Output Resistance ≥350Ω)
适用传感器灵敏度Explanation & Application scenarios 负载阻抗大于200 KΩLoad Impedance > 200 kΩ 非线性Non-linearity 优于0.01%FSBetter than 0.01% F.S.
最高灵敏度Maximum sensitivity Max 500Ω 使用温度为The service temperature is -30°C~60°C,湿度为10% RH~85% RH,无冷凝。-30°C~60°C, Humidity 10%~85% RH, Non-condensing
存贮温度为The storage temperature is -20°C~60°C,小于85% RH,无冷凝-20°C~60°C,<85% RH, Non-condensing 存贮温度为The storage temperature is -40°C~85°C,湿度为10% RH~85% RH,无冷凝。-40°C~85°C, Humidity 10%~85% RH, Non-condensing
重量变送器的电源电压范围 直流9~28V,最大功耗5瓦。(建议重量变送器不与易产生电源噪声的设备如电机、继电器或加热器等共用一个电源)DC 9-28V, Max Power Consumption 5W.(It is recommended that the weight transmitter does not share a power supply with devices prone to generating electrical noise, such as motors, relays, or heaters.)

技术支持与服务

安装指导

我们提供详细的安装指导文档和视频教程,确保用户能够正确安装和使用产品。专业技术人员可提供现场指导服务。

售后服务
  • 产品质保期:2年
  • 免费技术咨询热线:0574-87104599 / 13967835454
  • 7×24小时在线技术支持
  • 定期维护保养服务
  • 快速响应维修服务
技术培训

为用户提供产品使用培训,包括安装、调试、维护等方面的专业培训,确保用户能够充分发挥产品性能。

联系我们

0574-87104599
info@emcells.com
宁波市镇海区骆驼街道明斌路228号